All vendors :: KPL Aerospace PTY Limited - AB: Vendor products

M83248/1-113 - Fluorocarbon O-Ring, 75 (x 1)

0.0

In stock

USD $0.99

+ −

M83248/1-118 - Fluorocarbon O-Ring, 75 (x 1)

0.0

In stock

USD $1.45

+ −

High temp fluid resistant very low compression set flurocarbon rubber ring

M83248/1-906 - Fluorocarbon O-Ring, 75 (x 1)

0.0

In stock

USD $1.11

+ −

High temp fluid resistant very low compression set flurocarbon rubber ring

Magnaflux® SPOTCHECK® SKC-S Nondestructive Testing Material, 10.5 oz aerosol can DG Product

0.0

In stock

USD $48.85

+ −

Magnaflux 01-5750-77 is an NDT-approved solvent cleaner/remover for pre-cleaning before non-destructive testing and for removing excess surface penetrate from an inspection area before applying developer during liquid penetrate testing. This non-hydrogenated solvent remover can be used on a wide ran

MOBIL AERO HF (1 X 946 ml)

0.0

In stock

USD $32.37

+ −

Mobil Aero HFA and HF are formulated for aircraft systems where use of hydrocarbon-based hydraulic fluids is required. They are low viscosity products, high VI (viscosity index) fluid with excellent low temperature properties, good anti-wear performance, and good chemical stability. Mobil Aero HFA a

MOBIL AGL-SYN AVIATION GEAR LUBRICANT (18.9LT)

0.0

In stock

USD $697.18

+ −

Transmissions in civilian and military helicopters often operate under very challenging conditions - from heavy loads to extreme temperature variations, and reliability is non-negotiable. Choosing the right lubricant can help minimize these conditions, ensuring reliability, a long time between overh

Mobil Aviation Grease SYNTHETIC,SHC 100,13.4OZ CT

0.0

In stock

USD $41.84

+ −

Aviation Grease SHC 100 grease offers outstanding protection for aircraft wheel bearing applications and meets the specifications of ABSC, Dunlop, Goodrich, Honeywell, Messier-Bugatti and Parker-Cleveland. High viscosity index (VI) base stock with no wax content Outstanding high temperature and low

MOBIL JET OIL 11 (1 X 946ml)

0.0

In stock

USD $29.40

+ −

This legendary, hassle-free, second-generation oil helps keep engines clean and operating at peak efficiency. Approved against the MIL-PRF-23699, recommended for use in aircraft turbines. Excellent thermal and oxidation stability Excellent wear and corrosion protection Retains viscosity and film str

MOBIL JET OIL 11 (24 X 946ml)

0.0

In stock

USD $665.82

+ −

If you believe that one synthetic jet engine oil is the same as another, we have good news to share. They are not. Mobil Jet Oil II is a one-of-a-kind performer. No Standard Type II commercial aviation oil helps control jet engine deposits better than our products. Mobil Jet Oil II helps keep oil sy

MOBIL JET OIL 254 (1 X 946ml)

0.0

In stock

USD $29.57

+ −

Mobil Jet Oil 254 is a third-generation synthetic lubricant made from a specially prepared hindered-ester base stock fortified with a special chemical additive package. The result is a product having superior thermal and oxidation stability that resists deterioration and deposit formation, while mai

MOBIL JET OIL 254 (24 X 946ml)

0.0

In stock

USD $690.18

+ −

Mobil Jet™ Oil 254 is a high performance, premium quality, high thermal stability oil and is approved against SAE AS5780 (HPC) and MIL-PRF-23699 (HTS) standards. Excellent thermal and oxidation stability Excellent wear and corrosion protection Viscosity and shear stability across wide temperature ra

Mobil Jet Oil 387 Synthetic Jet Engine Oil, 1 qt

0.0

In stock

USD $35.86

+ −

Mobil Jet™ Oil 387 is formulated to deliver the most advanced protection using the latest technologies. SAE AS5780 (HPC) and MIL-PRF-23699 (HTS) approved. Long-duration fluorocarbon compatibility Outstanding oil life characteristics, such as bulk oil stability, viscosity and TAN control Very low vap

Molykote Z Dry Powder Lubricant - 283gm

0.0

In stock

USD $165.22

+ −

MOLYKOTE - Z-MOLY POWDER Molykote Z Powder can be used as a dry burnished (rubbed-on) lubricating film for metallic contacts, as a solid lubricant additive for self-lubricating plastics and sintered metal parts. It works as a solid lubricant additive in metalworking compounds and as a solid lubrican

MOLYKOTE-PASTE,80GM,G-N

0.0

In stock

USD $24.66

+ −

Molykote G-N Metal Assembly Paste - Acts as a running-in lubricant. Helps eliminate burnishing required, used in threaded connections, heavy loads, press fits, general assembling, service temperature from 0-250 deg F. Container sizes: 2.8 oz, pint, 10 lbs., 50 lbs., 165 lbs. 2076675

Momentive® High Temperature Silicone Sealant, 2.8oz Tube

0.0

In stock

USD $115.73

+ −

Momentive™ RTV106 high-temperature silicone sealant. This one-component sealant has a specific gravity of 1.07 and requires 3 days for full curing to form durable, resilient silicone rubber on exposure at room temperature and ambient humidity. This ready-to-use self-adhesive sealant has 26 grams per

Mousemilk. Penetrating Oil - Colorless to Light Amber, 8 oz bottle - DG Product

0.0

In stock

USD $24.36

+ −

Mousemilk® penetrating oil has a boiling point of 111 degrees C and a flash point greater than 4 degrees C. The colorless oil dries to light amber color on drying. It has sweet, pungent odor and comes in a 32-ounce bottle. This oxidation-resistant oil dissolves rust while relieving friction to free

Mousemilk. Penetrating Oil Colorless to Light Amber, 32 oz bottle - DG Product

0.0

In stock

USD $46.07

+ −

Mousemilk® penetrating oil has a boiling point of 111 degrees C and a flash point greater than 4 degrees C. The colorless oil dries to light amber color on drying. It has sweet, pungent odor and comes in a 32-ounce bottle. This oxidation-resistant oil dissolves rust while relieving friction to free

MS-122AD Dry Film PTFE Release Agent, 13.5 Oz - DG

0.0

In stock

USD $104.60

+ −

MS-122AD release agent and dry lubricant contains a high lubricity, low molecular weight polytetrafluoroethylene (PTFE) fluoropolymer for use as a dry film lubricant and as a release agent in molding operations. Use MS-122AD for application to molds up to 212°F (100°C). For preheated molds above 212