KPL Aerospace is a trusted aviation lubricant & parts supplier, providing high-quality aircraft oils, greases, fluids and aviation consu...
100%
1.4K
2 months 28 days
Springfield Lakes, AU
Contact us
Contact Vendor

Consumables

Price
ECT R-MC Series pre-mixed engine cleaner has a 7.5 to 8.5 pH level that ensures better cleaning of the surfaces without deteriorating the finish. With 23.7 millimeters Hg vapor pressure, this slight sweet odored cleaner has a specific gravity of 1.03 at 20 degrees C and a boiling point of 215 degree
0.0
In stock
USD $169.66
+ −
Overview Extreme Simple Green, Simple Green’s new aircraft and precision cleaning product, cuts through tough, built up grease, oil, dirt, pollution, insect residue and impact soils. Extreme Simple Green gets its superior cleaning from a unique “triple play” cleaning formula. Two high performance su
Flamemaster CS-3204 Chemseal Integral Fuel Tank Sealant is designed to withstand the attack of sulfur compounds present in jet fuels and is also used as a pressurized cabin sealant. Alternates with PR-1440, PS1440, PS-890, and MC-236.Type II, Class A 1/2 Sealant. Specifications: AMS-S-8802 formerly
Also known as Alodine 1132, the Touch-N-Prep pen has a convenient applicator to provide a clean, cost effective, easy-to-use method of repairing conversion coatings for touch-up areas. Bonderite M-CR 1132 Aero Touch-N-Prep Coating is designed to save labor, material and time when applying a dry-in p
Henkel Loctite® Hysol® EA 9309.3NA epoxy adhesive is a toughened and two-part adhesive, containing liquid part-A and gel part-B. Pink colored part-A component has epoxy like odor whereas blue colored part-B component has ammoniacal odor. Both the part-A and part-B of adhesive has a flash point of 24
Kilfrost Type I high-performance de-icing fluid is diluted in a 1:1 ratio in standard hard water and comes in a 25-liter drum. The de-icing fluid is orange in color and has a flash point greater than 100 degrees C and an auto-ignition temperature rating of 446 degrees C. The liquid fluid has a pH le
The Kolor Kut Water Finding Paste is golden brown in color and turns brilliant red upon contact with water. This water finding paste will successfull gauge water content in all petroleum and hydrocarbons as well as sulphuric acid, nitric acid, hydrocloric ammonia, soap solutions, salt and other chlo
Royco 555 is a 5-centistoke synthetic based lubricating oil formulated specifically for gas turbine engines, helicopter gearboxes and transmissions. This turbine engine oil offers improved load carrying capacity, anti-wear, corrosion protection, and high thermal-oxidative stability due to a blend of
Royco 560 has been developed for the increased demands of the latest technological developments in gas turbine engines. With the advent of higher bypass ration engines, higher trust output and consequently higher engine operating temperatures and pressures, this fluid has demonstrated a remarkable s
Anderol's ROYCO 586M is a medium grade, highly refined petroleum oil based lubricant formulated with modern additives that offer: oxidation and corrosion protection; high load carrying; antifoaming; and a high viscosity index for both low and high temperature fluidity. ROYCO 586M is best applied to
ROYCO 885 is a light, synthetic-based lubricating oil containing additives for oxidation, corrosion inhibition, anti-foaming, and rust protection. This fluid has very low volatility and exceptional low temperature performance as well. ROYCO 885 is designated as P-17 under Military Standard Mil-P-116
Sherlock Leak Detector is used for detecting leaks in pipe joints, tube connections, tanks or any system under gas or air pressure. It is very easy to use, simply wipe surface to be tested with a brush or dauber, squirt on with a squeeze bottle or spray with a trigger sprayer. Small leaks form white
DG Item, Pre-Order, may take approx 2 months to receive this product Henkel Loctite® Hysol® EA 934NA epoxy adhesive kit is a two-component thixotropic paste formula, containing part-A solid and part-B liquid. The gray colored part-A of epoxy adhesive has a slight odor and a 1.55 specific gravity. Th
0.0
In stock
USD $169.74
+ −
Overview LPS-2 meets or exceeds these specs: MIL-C-16173D Grade 3 Class I, para. 3.3, 3.4, 3.7-3.11 MIL-C-81309D Type III, para. 3.4-3.5 Features & Benefits Nondrying oily film provides long-lasting lubrication Loosens rusted and frozen parts with powerful penetration Protects steel parts indoors fr
LPS® CFC-free electro contact cleaner is ideal for removing oil, grease, dirt, flux and other contaminants. With 352.53 millimeters Hg vapor pressure at 38 degrees C, this hydrocarbon-like odored cleaner has a specific gravity of 0.64 to 0.67 at 20 degrees C and a boiling point of 140.9 degrees F. I
LUBRI-BOND 220 Lubri-Bond 220 is an air drying, MoS2 based solid film lubricant with an epoxy binder system. This coating provides good corrosion resistance and performs best in higher load carrying applications. It is ideal for applications that do not require a thermally cured coating. Lubri-Bond
0.0
In stock
USD $44.32
+ −
Fluid Type: mineral ISO Viscosity Grade of Base Oil: 150 NLGI Grade: 1 Thickener: Lithium Food Grade - NSF H1: No Color: Off-white Dropping Point (F°): 380 Dropping Point (C°): 193 Operating Temp Range: 5 to 270
Magnaflux 01-5750-77 is an NDT-approved solvent cleaner/remover for pre-cleaning before non-destructive testing and for removing excess surface penetrate from an inspection area before applying developer during liquid penetrate testing. This non-hydrogenated solvent remover can be used on a wide ran
MOLYKOTE - Z-MOLY POWDER Molykote Z Powder can be used as a dry burnished (rubbed-on) lubricating film for metallic contacts, as a solid lubricant additive for self-lubricating plastics and sintered metal parts. It works as a solid lubricant additive in metalworking compounds and as a solid lubrican
0.0
In stock
USD $24.66
+ −
Molykote G-N Metal Assembly Paste - Acts as a running-in lubricant. Helps eliminate burnishing required, used in threaded connections, heavy loads, press fits, general assembling, service temperature from 0-250 deg F. Container sizes: 2.8 oz, pint, 10 lbs., 50 lbs., 165 lbs. 2076675
Show other 20 products

testing